
                        Bricks demo



1. Installation 

   1.1 Install WNT on the receiver and the transmitters
       node

         - install TCP/IP protocol

         - install the network adapter(s)

         - set the screen resolution to 1024x768

   1.2 On each transmitter, edit the file
       %systemroot%\system32\drivers\etc\hosts
       and add the ip address of the receiver adapter 
       the transmitter is connected to followed by the
       name of the receiver. 

     ex:  16.190.96.10  sable1
 

2. Running the demo

   2.1 Receiver:

         - invoke bricksrx.exe

         - maximize the window

         - in the File menu select Open
           and open bridge1.brix

   2.2 Transmitter:

         - invoke brickstx.exe

         - maximize the window

         - in the Control menu:

             - select Color and choose a color for 
               the bricks (red for the 100 mbps link,
               yellow for the 10 Mbps link)

             - select Settings and set:

                 - the name of the receiver
                 - the brick size to 10Mbits

                 - click Go


      
